John Anderson Guncraft.45-70 Model 1874 Battery Gatling Gun. John Anderson Guncraft.45-70 Model 1874. Built from the original Colt blueprints and all. This is more likely with the built-up cartridges such as the English Boxer. Brass Castings to make the Full Scale Colt Gatling Gun. One set of brass castings for the ten barrel Colt 1874 or 1883 Gatling Gun with the elevating and automatic traversing mechanisms. These castings were made some years ago in molds formed using original Colt positive patterns.
Although Dr. Richard Gatling's early hand-cranked 'battery guns' had been introduced as far back as 1862, for the first 15 years of their existence they were bulky and used a series of unshielded barrels to produce their fire. Round were fed loosely into a hopper and the weapon could produce a (theoretical) rate of fire of about 600 rounds per minute, although due to jams and gas issues, it was typically closer to 200 and often could not be maintained.
- 1874 10-BARREL GATLING GUN. By Russell Taylor. This impressive 1:3 scale model of a 10-barrel Gatling gun was shown by Russell Taylor at the 2019 Midlands Model Engineering Exhibition. Invented by Richard Jordan Gatling, this gun was chambered for the 45-70 government black powder cartridge. Cartridges were fed to the gun from a stick magazine.
- Dec 22, 2010 Page 3 of 4 - D&E.22LR 1874 Gatling Gun Build - posted in D&E Specific: The mechanical polish is very similar on all the barrels but I do have concerns about matching color if the barrels are blued. I have had this problem in the past on rifles I have built from military bolt action receivers. Some components particularly on the US 1903 and 1903A4 Springfields would come out tinted green.
- These extremely high quality reproduction Gatling Guns are made by an individual who works from the original Colt blueprints and all parts interchange with the originals. They are exact replicas and perfectly finished with all polished surfaces flat and true. He makes these at a rate of about two per year and they are almost works of art.
Early Gatling guns, such as this .58-caliber RF 1862 model, with a half-dozen 33-inch barrels, had a rate of fire of 600 rpm, an overall length of 64-inches and a weight, with carriage and limber, of about 630 pounds, unloaded. (Photo: Springfield Armory National Historic Site)
Although Dr. Richard Gatling's early hand-cranked 'battery guns' had been introduced as far back as 1862, for the first 15 years of their existence they were bulky and used a series of unshielded barrels to produce their fire. Round were fed loosely into a hopper and the weapon could produce a (theoretical) rate of fire of about 600 rounds per minute, although due to jams and gas issues, it was typically closer to 200 and often could not be maintained.
- 1874 10-BARREL GATLING GUN. By Russell Taylor. This impressive 1:3 scale model of a 10-barrel Gatling gun was shown by Russell Taylor at the 2019 Midlands Model Engineering Exhibition. Invented by Richard Jordan Gatling, this gun was chambered for the 45-70 government black powder cartridge. Cartridges were fed to the gun from a stick magazine.
- Dec 22, 2010 Page 3 of 4 - D&E.22LR 1874 Gatling Gun Build - posted in D&E Specific: The mechanical polish is very similar on all the barrels but I do have concerns about matching color if the barrels are blued. I have had this problem in the past on rifles I have built from military bolt action receivers. Some components particularly on the US 1903 and 1903A4 Springfields would come out tinted green.
- These extremely high quality reproduction Gatling Guns are made by an individual who works from the original Colt blueprints and all parts interchange with the originals. They are exact replicas and perfectly finished with all polished surfaces flat and true. He makes these at a rate of about two per year and they are almost works of art.
Early Gatling guns, such as this .58-caliber RF 1862 model, with a half-dozen 33-inch barrels, had a rate of fire of 600 rpm, an overall length of 64-inches and a weight, with carriage and limber, of about 630 pounds, unloaded. (Photo: Springfield Armory National Historic Site)
By 1866, Colt took over making Dr. Gatling's guns and won the first large U.S. Army contract for the devices, one they were eager to keep by introducing upgraded generations. By 1873-ish, the caliber had switched to .45-70 Government and short-barreled 'Camel' guns were being produced, which were much more maneuverable.
In 1877, Colt introduced a new model that enclosed not only the barrels but also the breech section in a bronze housing covered by a front plate through which the muzzles protruded. Further, the crank could be rotated to a more ergonomic rear position and, through use of a 40-round Bruce vertical feed mechanism which could be topped off, the rate of fire really jumped to well over 1,000 rounds per minute as the gun in a 10-barreled format, fired 10 rounds with each turn of the crank. Best yet, the smaller 5-barreled gun, when used on a tripod, only weighed 90-pounds.
In an Army test of a prototype gun, one of the Bulldogs fired 1,000 rounds in 79 seconds— which is amazing even by today's standards– and scored 996 hits on target at a range of 500 yards. Uncle Sam bought 17 Bulldogs for the Army as well as others for the Navy and the model proved popular in overseas sales as well.
An M1883 Colt Gatling gun in .45-70 with a 104-round Accles magazine
While more modern autoloading machine guns replaced Gatlings in U.S. service, some were still seeing combat in China and the Philippines in the early 1900s.
The M1893 Gatling, the first chambered in .30-40 Krag. This wonder, fitted with 10 31-inch octagon barrels, could let those big buffalo-killer sized rounds rip at 525 rounds per minute, which would produce a giant billow of burnt black powder in the process. Weighing in at 200-pounds (sans bipod) this thing was a beast to run but had all the bells and whistles of a modern Gatling design including the Murphy Stop and the Bruce Feed.
9th U.S. Infantry Gatling gun detachment in the court of the Forbidden City, Peking, China 1900 Boxer rebellion LC-USZ62-137103 1874 Barry machome.
Gatling guns trained on the Filipinos, near Manila, Philippine Islands Nov 25 1899 LC-USZ62-136148 1893 models
Further, Gatlings were only fully retired by the U.S. Army after 1914, not a bad run considering only about 500~ in 20 different marks were acquired between 1866 and 1904.
U.S. Army/Navy Colt Gatlings acquired, model, caliber and number:
Gatling Gun Blueprint Plans
M1866 .50-70 (50 Army)
M1871-.50-70 (10 Army)
M1874 Camel .45-70 (56 Army)
M1875 Long .45-70 (44 Army)
M1875 Camel.45-70 (4 Army)
M1875 Navy .45-70 (10 Navy)
M1876 Long .45-70 (19 Navy)
M1877 Bulldog .45-70 (17 Army)
M1879 .45-70 (32 Army)
M1881 .45-70 (27 Army)
M1883 .45-70 (40 Army)
M1885 .45-70 (21 Army)
M1886 .45-70 (20 Army)
M1887 .45-70 (20 Army)
M1889 .45-70 (18 Army)
M1891 .45-70 (17 Army)
M1892 .45-70 (18 Army)
M1893 .30-40 Krag (18 Army).
M1895 .30-40 (84 Army).
M1903 .30-06 Spfd (21)
In 1907, about 175 older Gatlings (M1895/1893/1892/1891/1889/1887/1886 models) were rechambered for .30-06.
See Full List On Fallout.fandom.com
Vagrant download windows 10. The below unit return, from the 136th Company (Mine), U.S. Army Coastal Artillery, stationed at Fort Hancock, New Jersey, details they were still practicing with their .30-caliber Gatlings as late as October 1914. It would have been interesting to imagine them repelling an assault by the Kaiser's infantrymen with such gear.